Configure Epson Intelligent Receipt Printers

SimplySwim Plan

Legacy Sales Complete Elite

Epson Intelligent receipt printers are designed to be used with browser based cloud platforms - removing the need to have specific client side configuration or special settings for end-users web browsers.

There are 2 parts to the configuration:

- Printer Configuration

- SimplySwim Configuration

Printer Configuration

• Find the Serial Number of the printer.  This is usually found on the sticker underneath the printer.

 

• Find the IP Address of the printer.  By default, this is printed each time the printer is switched on

• Open a web browser and connect to the printer configuration page using the IP Address from above:  
  
  http://x.x.x.x/webconfig/
  
  
  
• If prompted, enter epson as the username & password combination
   
• In the menu on the left-hand side, navigate to Configuration > Web Service Settings > Server Access > Direct Print

• Enable Server Direct print
   
• Enter the Serial Number of the Receipt Printer into the ID field
   
• Enter the following URL into the Server 1 URL field:

http://api.simplyswim.net.au/api/receipts/getreceipts/

• Update the Server 1 Interval(s) value to 3

• Click Apply

Configuration in SimplySwim

• Configuration → System Setup → Point of Sale
  • Enable Epson Intelligent Printing - On
     
  • Use SSL for Epson Intelligent Printing - On
    
    
• Update Workstation settings, removing the IP Address, replacing it with the Serial Number of the printer (same as the value in ID).